Why Anti vibration boring bars is Better Than Steel Anti Vibration Boring Bars?
When we cut, we are worried about the vibration problems.
In the process of machining, it will be relatively smooth, so there is cnmg tool holder.
Carbide boring bar is used for deep hole processing.
Traditional steel long boring bar is broken or broken due to bending and vibration, because it exceeds a certain depth.
There is a vibration absorbing device inside the handle of the handle, which is opposite to the vibration generated by the bending of the handle, so it can absorb vibration and increase stability.
- This turning tool holder is made of tungsten carbide material, which is different from traditional long boring bar.
- When we do cutting, we are worried about the vibration problems. Tungsten carbide tool holder mainly solves the problems of accuracy and stability cased by mechanical vibration in machining.
- When encounter excessive lateral force, traditional steel anti vibration boring bars will have accuracy deflection and smoothness problems.
- The turning tool holder is made of full tungsten carbide material, which uses its material properties to ensure its rigidity and shock absorption.
- It will not be distorted due to excessive lateral force. In addition, the processing depth is extended in some working conditions.
- At the same time, the accuracy of the processing surface can be improved, and the possibility of ultra-long, ultra-deep, and ultra-high-precision processing can be realized.
- Indexable turning tool holders adopt the locking thread connection method.
- It is important to pay attention to the importance of the thread process.
- The "Full Thread Grinding Process" can effectively avoid: loosening of the thread head, chipping, inaccurate precision, no anti-vibration effect series of questions.
Anti vibration Boring Bars Manufacturing
This kind of cnmg tool holder is suitable for high-precision machining of machining centers, high-speed precision carving and high-speed milling.
The advantages below:
- Carbide tool holder made of full tungsten carbide material, excellent rigidity, good shock absorption, and will not be distorted due to excessive lateral force.
- Turning tool holder extend the processing depth, improve the accuracy of the processing surface, and realize the possibility of ultra-long, ultra-deep, and ultra-high-precision processing.
- There is no worry about welding fracture, and the variability of the cutter head is emphasized.
- Anti vibration boring bars can reach dozens of combinations, it can cover all processing requirements from rough to fine.
- The cutter head and the long boring bar are connected by thread, and run in the opposite direction of the spindle direction.
- Even if the cutter head is damaged, the cylindrical shank can be repeatedly.
- And the cutter head of carbide shank can be changed conveniently and quickly on the machine tool.
Carbide Boring Bar Standard Sizes below, which we all have molds
- Our standard stock size from D-08-100-M4 to D-32-450-M16.
- We also can do customized sizes according to drawings and make new molds.
- Or D, M and Total Length keep same, D1 and L1 are changed, this kind of change based on standard size, we can process it wthin two days.
- The added size, D-32-500-M16
